TNS model Narrow Fabric Needle Loom with an electronic take-off regulation
TNS model is a narrow fabric needle loom for the range of reed width from 27 to 210mm and used for both elastic and non-elastic tapes with weaving system Ⅰ, Ⅱ, Ⅲ, Ⅴ.
An electronic fabric take-off roller is equipped as a standard specification.
It realizes a quick change of weft density with a touch screen.
Setting on the screen in advance, you can see the variable weft densities appear continuously on the same fabric.
The thickness of the fabric can be up to 3mm (depending on the kinds of yarn), which cannot be achieved normally with mechanical gears take-off system.
TOMIWARE system is equipped with a colored wide 5.7inches touchscreen, on which you can set "Weft density", "Production" and "Loom speed" easily.
Also, TOMIWARE have the extensive function for electronic shedding motion to realize unlimited repeat.
Setting of weft density, production and loom speed
Setting of continuous pick densities
Coutinuous weft density change
Setting of electronic shedding motion）
Band Rapier Loom with woven selvedges
Different from general rapier looms, this model realizes woven selvedges with the bobbin unit equipped. The selvedges is almost plain and beautiful like the ones by a shuttle loom.
The adoption of a band rapier enables to achieve more than 400mm weaving width, which cannot be by needle looms.
It is possible to equip a dobby machine (Max. heald frame 16pcs.) to be suitable for various weaving structures.
An electronic fabric take-off roller is equipped as a standard specification for a quick change of weft density with a touch screen.